I was having some problems. My Blaster wont idles unless i keep hitting the throttle. Then once i get to gears 4,5, and 6 it starts to bog and loose power, sometimes it even cuts off. I have a uni air filter & is also mixing my own oil at a 32:1 ratio. Im planing on taking my air lid off. Im in Central PA but im not sure the sea level or my elevation level. I have a stock jet (230) if that helps:-/X(
Blaster wont idles, and is sluggish/bogging
- Thread starter steve89
- Start date
Well you need to go up a size for the Premix fuel , and if you take the lid off you will need to go up one Or two sizes on that main as well , Do you have any other modifications to the blaster ?
I had the problem and took it in for it, it was because my parking brake line wasnt connected to the brake so it thought it was on, try looking at that before you bring it some where
ok so the uni filter doesnt require to go up a size? No i dont have any other mods to my blaster, just the uni and 32:1 premix
I think that the Uni breathes better, so maybe one size bigger for it.
Always start with a bigger than you think jet for a plug chop, it pays to be safe as you do not want lean at WOT.
Always start with a bigger than you think jet for a plug chop, it pays to be safe as you do not want lean at WOT.
