blaster trottle cable

natureboyeli

New Member
Apr 17, 2010
36
0
0
NJ
hi guys i have a 2000 yamaha blaster and it starts good and all wen my handle bars are pointeed to the right or straight but wen i have it in nuetrasl and its running and i turn my handle bars left my quad shuts off plzz help i think its teh cable bu t idk no how to fix it plzz help
 
i bet its a TORS issue, probably have a short in the wires. do some research on here for how to remove the tors and your issue will most likely go away
 
thanks ill check also do u have any idea s about wat this problem may be lookl
the bottom off my engine leaks blue liquiad im preety sure its oil but any way do u think i have a crack in my case or anything pllzz help
 
could be a leaking clutch cover gasket.....and i would try a new carb cable, it could be stretched out and dropping the slide closed causing it to stall
 
I would check the cable first, routing, ware and such.

As for the leak I would check the clutch cover gasket like freek said.
 
Mine did the same thing. It was a short in the throttle switch. Disconnect the wires and you should be good. And the blue fluid is used tranny oil. replace your clutch cover gasket.