Bad Throttle REsponse & Inability to Idle

Livinstrong

New Member
Nov 22, 2009
70
1
0
CT
I can't figure out what's wrong with my blaster, the only upgrades I have done to it are a 14 tooth front sprocket and Boyseen power reeds yet it runs like crap. Also, I can get it to idle, but if I go any more than like 20% throttle, the engine dies.
 
Last edited by a moderator:
where is the air screw set on the side of the carb? has the carb been cleaned lately?
The air screw is set all the way in, which is the only way that I can get it to be ridable. If I turn it out, then it can idle, but then the engine dies if I give it any more than like 20% throttle. The carb gets cleaned pretty much every weekend in attempts to fix the problem.
Did you rejet? Is there crap inside your carb?
I have tried a 220 and 240 main jet but they don't fix the problem, and my carb is spotless.
 
well ur airscrew needs to be 1 1/2 turns out to start with.then go from there
I just tried that and it won't idle and if I'm at idle like rpms and give it more than 50% throttle, the engine dies.

Should I try to move the throttle clip position down one?