My local shop stopped stocking Klotz Super techiplate. Bastards, I've been running this stuff for 30 years. I've used R50 before (good stuff) but Klotz says it will not blend with ethanol and I sometimes mix in 10-20% E85 to play with jetting.
Does anyone use BeNol? Heard it's good for hi RPM kart engines but tends to gum up the rings.
Just an FYI... Last month I thought I would give Yamalube a try cause I was breaking in the top end on the Blaster. I don't like to use anything synthetic when I break in a motor. So I mixed up 10 gallons at 32:1 and put it in the Blaster and the Banshee. The Banshee fouled the plugs 3 times before I remixed at 40:1 and closed the plug gap up a little. I have run Super tech plate at 40:1 for 8 years in the shee and never fouled a plug once.
Does anyone use BeNol? Heard it's good for hi RPM kart engines but tends to gum up the rings.
Just an FYI... Last month I thought I would give Yamalube a try cause I was breaking in the top end on the Blaster. I don't like to use anything synthetic when I break in a motor. So I mixed up 10 gallons at 32:1 and put it in the Blaster and the Banshee. The Banshee fouled the plugs 3 times before I remixed at 40:1 and closed the plug gap up a little. I have run Super tech plate at 40:1 for 8 years in the shee and never fouled a plug once.