So i whuld like to lower my blaster.any one have one that is lowered and have some pics. also is there a DIY for lowering it. I see the kits on ebay any one have one and if so How do they work can you send me pics to show me. Thanks guys
So i whuld like to lower my blaster.any one have one that is lowered and have some pics. also is there a DIY for lowering it. I see the kits on ebay any one have one and if so How do they work can you send me pics to show me. Thanks guys
i have one of the lowering kits. they are only for flat track though. the link that lowers the rear is NOT any good for jumping. when the front and rear are installed you can drag frame if you want to. basically makes the bottom of the frame about an inch off the ground. also one thing that i liked about it was that the front gets widened about 2.5 inches. DO NOT USE LOWERING KIT FOR TRAIL RIDING!!!
I want to lower it because I want to take it to a drag racing track just fig it whuld help me keep it on the ground.
lol drive a lowered S10.
How serious are you about getting into drag racing? If you're mildly serious, strut it. They can be made cheap, they'll last forever, and easily swappable.
If you're REALLY serious about it, find some Marvin shaw drag shocks and slap those puppies on. They're about 3" shorter than stock blaster shocks (for a lowered stance) and are fully pneumatic/oil (require no external spring) and adjustable. They don't ride good, but they take up the beating without giving up too much "set"
Is there a DIY or vid on how to do this