Hey everybody, so i've been trying to do a leakdown test with AWK's leakdown tester.
I have the expandable plug, cut with grease in the exhaust port.
I have the tester in the intake
I made sure piston was BDC
Pumping the tester i cannot get a read above 1.5psi
So I soap/water sprayed the tester and around everywhere I could think of, however I see no bubbles/leaks.
I did have a small oil leak a coming from just under the exhaust flange? possibly where top end/bottom end meet? After a short ride there would be very light oil spatter on the frame.
I do not see any bubble leaks there not that i have removed the exhaust flange and header?
Any advice/tips is greatly appreciated.
I have the expandable plug, cut with grease in the exhaust port.
I have the tester in the intake
I made sure piston was BDC
Pumping the tester i cannot get a read above 1.5psi
So I soap/water sprayed the tester and around everywhere I could think of, however I see no bubbles/leaks.
I did have a small oil leak a coming from just under the exhaust flange? possibly where top end/bottom end meet? After a short ride there would be very light oil spatter on the frame.
I do not see any bubble leaks there not that i have removed the exhaust flange and header?
Any advice/tips is greatly appreciated.