Just with an hvlp paint gun and no its just a 3 stage paint job you mix a pearl with your clear and bam!!! Pretty colorsPowdercoat? how did he do the a-arms?
Yeah the front one i painted black to see how the green would look covering the black its a little darker green on them all lol i did want one to be darker then the restDid you paint the underside of the fenders? the front ones look black in that picture
not really noticeable difference in the picture. i was talking the bottom side of the fenders.Yeah the front one i painted black to see how the green would look covering the black its a little darker green on them all lol i did want one to be darker then the rest
not really noticeable difference in the picture. i was talking the bottom side of the fenders.
It will idle really high idk why and when i adjust my air fuel screw i can only turn it out .5 and its good ...??
Ok but the only place i could have an air leak is from the reeds to the air intke hose?sounds like you may have an airleak, and are compensating for it with the airscrew
better get it leakdown tested.
http://www.blasterforum.com/threads/about-air-leaks-save-your-engine.55537/
http://www.blasterforum.com/threads/how-to-perform-a-leak-down-test.44653/
You can have leaks in multiple places without taking it apart!
bad base or head gasket
case leak
crank seal leaks
you need to test it!
also, get an aftermarket pipe! if you got the money, i say go in on the dyno port group order they are doing friday!
Yes.Can I take an accurite a leak test with the motor still on the bike ?
OK awesome I will just have to check all gakits and seams on the engine! Thanks guysYes.