Iv got a 2005 yamaha blaster jus had a new piston and barrel cleaned up.
After i put the piston in i started the quad 2nd kick, i run 5ltr's of petrol through the quad mixed with good 2stroke and a bit juicy because new piston in 2nd gear with quarter revs. I then put in another five ltrs starting and stopping the quad all day first kick. Iwent out on the quad and after a while i came in for a 10min break after i came back out and started the quad (first kick) the quad was reving as if it was cold i drove the quad really easy in low gears thinking it needed warmed up after about 2mins the quad died i kicked it and 2nd kick it done the same as if it was cold i gave it a good rev and then drove on after 30secs the quad stopped i kicked it a few times it tried to fire then blew a puff of white smoke out the exhaust. the reeds are fine.pulled the barrel of piston and barrel are fine. dont have a clue whats wrong?
After i put the piston in i started the quad 2nd kick, i run 5ltr's of petrol through the quad mixed with good 2stroke and a bit juicy because new piston in 2nd gear with quarter revs. I then put in another five ltrs starting and stopping the quad all day first kick. Iwent out on the quad and after a while i came in for a 10min break after i came back out and started the quad (first kick) the quad was reving as if it was cold i drove the quad really easy in low gears thinking it needed warmed up after about 2mins the quad died i kicked it and 2nd kick it done the same as if it was cold i gave it a good rev and then drove on after 30secs the quad stopped i kicked it a few times it tried to fire then blew a puff of white smoke out the exhaust. the reeds are fine.pulled the barrel of piston and barrel are fine. dont have a clue whats wrong?