Search results

so I was rebuilding a kfx400 and once I put it all back together I messed up the timing and wouldn't start so I took it apart fixed the timing put it back together then it started up sounded good and then died, now it just sounds like the starter is working nothing else ??? does anyone know what...

so I decided to buy a k&n air filter because I wanted to take the air box off of my 80 and when I was taking the air box off there's a little hose connecting to it coming from a little box on the frame that goes to another hose in to the engine ? I'm imaging it's just a excess oil or something...

I have went through 3 float needles now???!? each one ends up deformed at the little rubber tip and I can't figure out why does anyone know because when it does this it doesn't hold gas and just floods the engine

I have a 99kx 125 and recently I power washed it and drained the gas and put fresh gas in it- 35:1 and then started it up and it was just idling then it bogged down and died. so I tried cleaning the spark plug and no chance of starting and then I tried starting fluid and still not starting and...

so I got a 1999 kx125 and I was gonna ride it one weekend and I got it warmed up and as soon as I got it in first gear and went about 5 ft it bogged down and died. so I bought a rebuild kit for it *needed it anyway* so after I had got the bike working again with the new piston I decided to go...

I know I post a lot guys but don't get annoyed just yet. When you remove a flywheel along with the stator etc.. is there timing? if I were to completely take the flywheel off and change the seal is there a certain way you have to put it back together or can you just slap it on ? Thanks

I doubt anyone would know but does anyone know what the left side crank seal size is ? Thanks anyway

So I had found out my 85 had been running too lean... And wasn't getting much gas; probably why it wasn't starting. Also found out I have a stock main jet 125. And Idk how the sizes go. Could someone tell me what size I should get for more gas ? And how I fix the running too lean problem

do you think I can switch my rm85 carb with a blaster carb that is tors eliminated ? Just wondering bc the carb on my 85 is junk and I have an extra carb for a blaster laying around

Does anyone know why my rm85 only starts with starting fluid ? Also when I rev it really quick after I start it it'll bog down?? Please help.

I'm trading my blaster for this rm85 soon and was wondering if anything looked broken bad etc on the pics this guy sent me ? Lmk what you guys think. Thanks

Is it possible to make a 2001 blaster headlight into a 2004 headlight ? Idk how to explain much better but I wanna make the headlight in the top picture like the headlight in the bottom picture? Any links ? thanks

does anyone know what the numbers at the bottom of the carb bowl mean? I have two different carbs and one bowl says 1-1 and the other says 1-2 ?? Anyone know what this means

Okay guys so I've been looking around on the site to try and find some answers but I couldnt find much.. anyway I've had my blaster for a while and I've noticed a weird knocking sound when it idles. It's hard to explain but it's like a tick tick tick tick tick really fast, If that makes sense...

So I flipped my blaster... And I got it back over and nothing was hurt but the handlebars bent a little bit. the only thing I noticed is that there was some type of rattling? It would only rattle when you hit the gas (while idling) and when it revved back down it would rattle. It sounded like it...

I was just wondering if the connecting rod on my blaster is supposed to have any play. If so what are the specs ? When I took apart my blaster a while a go I noticed that the connecting rod had some lateral play. NOT VERTICAL . It did not go up and down just side to side a little bit. I don't...

I bought 12 rubber bushings for my a arms and i have no idea how to get the origanal bushing out. Please help

has anyone tried this cylinder/piston kit ?? http://m.ebay.com/itm/161206197107?nav=SEARCH Let me know what you think

Does anyone what size rear and front sprockets make for best performance? Not really looking for anything specific just want good performance.

Does anyone have any tips for getting a caliper back on to the wheel... I had to switch out the a arms and the axle. the caliper came off of the wheel And I can't seem to get it back in.