G
gonefishin
Guest
take a can of carb cleaner put the straw on the nozle and use very small skwerts around base gasket,boot,snorkle ect. CAUTION BE EXTREMLY CAREFUL with the spray it will cut your oil and scald the piston. if you are scared try using wd40. how will you know there is a leak just listen for rpm change. also blaster no start 1 remove plug 2 take lighter to tip of plug 3 heat plug 4 install plug if it fires it was spark if not 5 use 1 shot of wd40 1 shot of carb cleaner.