I built my 2003 blaster cr250 last spring. It was in "over the bars" at the front of dirt wheels mag. It looks like you cut the front mounts off and moved them and welded them back on. Thats the same thing I did at first and the frame broke just above the mounts on both sides on my second ride. I had to start over and cut out that section of frame, and weld in some heavier stuff. And this time I used rubber type mounts from a honda streetbike. I also see you have no mount hooked to the head where there should be. You probably ought to get er in there stout if you want it to last. Since re-doing mine, I've been on several rides and its holding up great now. But I am selling it on craigslist so I can get something more practical to ride with my 2 year old son.