I just bought an 03 blaster, the kid said it was bore .5 over just cleaned up and honed with a new piston and rings, The motor he said was not broken in yet and that i would have to do it. I drove the bike around my yard today, it blows white smoke while at idle or driving, warm or cold. Is this because it is not yet broken in? the rings are not yet completely seated? Also the bike seems to be a bit sluggish down in lower rpms almost like its running too rich, i tryed adjusting the carb but it seems fine.
The kid said that everything was went over and the carb has just been completely cleaned inside and out so i don't think its that. I was thinking possibly the plug being fouled? because it has not been replaced yet since the new build.
Or is this just all happening because it is not fully broken in yet?! Help im lost.
I drove the bike for at least 2 hrs today and i would think by now it would be broken in?? Also the bike has a full fmf pipe w fatty and a reed spacer that is about it.
The kid said that everything was went over and the carb has just been completely cleaned inside and out so i don't think its that. I was thinking possibly the plug being fouled? because it has not been replaced yet since the new build.
Or is this just all happening because it is not fully broken in yet?! Help im lost.
I drove the bike for at least 2 hrs today and i would think by now it would be broken in?? Also the bike has a full fmf pipe w fatty and a reed spacer that is about it.