Search results

Hey guys I am looking for a stock carburetor with or without tors removed. Thanks

Hey guys I needsome quick info on crabs. I have my carb turned 15 degrees to the left from straight up . Will this affect anything as far running or performance ?

My Buddy just replaced his clutch and now he says when He puts it in first gear the bike just dies. It runs in neutral and if you put it in first or second it dies and moves a little bit he even tried reving it a bit. What could be the problem? The clutch soaked in oil overnight before install...

Hey guys I flipped my blaster the other day and thought nothing of it. I rode for the remainder of the day and when I got home I found the front right tire bent inwards. If I look straight at the bike the top of the tire is leaning into the bike almost like a toe\ camber adjustment but these...

Hey what do you guys run for bearings? I replaced mine 6 months ago and there already starting to wear out. I also wa wondering if anyone Reyes tapping a zero onto the reAr carrier so I can keep grease in and dirt out. Thanks

Hey guys I had a couple questions regarding carb and intake. I just bought a 34mm mikuni carb I was wondering if i can use the blaster throttle cable also is there a kit sold to attach these carbs to the stock air box? thanks

Has anyone heard of a arm extenders ? Where do I get them ? Pros and cons? And no I don't mean wheel spacers

Hey guys I recently bought a yamaha warrior off CL for 200 bucks. It wasnt running when i bought it but a few carb fixes and she purrs like a kitten. I was wondering what you can do to these four strokes to get some more power out of them. I am assuming intake and exhaust. So open air box drop...

Hey guys I was wondering whats a better investment for power for the price. I can either buy a 3MM stroker crank and install that or get a port and polish done for the same price. What are the net gains from either mod and I know your supposed to work from the bottom up but extra funds for my...

I just wanted to pass this by again. The 36MM mikuni carb is too big for my blaster engine with just pipe intake,vf3 port/polish and head redesign?

Is anyone out there running a pod filter on a stock carb? I was wondering if they have noticed any performance gains over open air box with paper filter? I was also wondering if anyone has attempted any other mods to get more air flow. Thanks

Hey guys I did a search on this carb with the blaster forum and came up with nothing. I was wondering if anyone has used the TM33 carb and where to start as far as jetting it properly. I have not measured the ID of the carb on the engine side but the OD is 40mm. I got the carb for free so Im...

Hey guys I was wondering how far the stock carb will take me as far as modding. I already have open air box and K&N, FMF fatty exhaust, v-force 3 reeds, wiseco pro-lite piston, carb is main jetted at 270-280 and I still want some more power out of my blaster. I was thinking of having the head...

Hey guys I was wondering if everyone that purchased the V-force 3 reed kit for the blaster used the black plastic piece that goes in the front and looks to me like it restricts some air flow? I guess it is supposed to be a velocity stack?

Hey guys I just recently purchased a 95 yamaha warrior for 100 bucks. I think it was a steal since its complete. The bike runs and idles great but when you Give it WOT it wants to die. I did some research and found that the carb on this bike is not stock. I was hoping someone could tell me what...

Hey guys I know there is alot of controversy over the best tranny oil.. I would like to know however what would be better to use if I hadto use one that I currently have in my garage. I have 80w-90 gear oil and 10w-40 Motorcycle oil with wet clutch protection. Which one would be better to use if...

I was riding in the trails the other day and noticed my blaster would make a ping\knock sound at WOT. I am running 93 octane with pre-mix I have a FMF fatty pipe, Vforce 3 reeds, WIseco piston, vitos high comp head gasket. open air box lid. I am running a stock carb with stock settings except...

Hey Guys me and my buddy picked up a 2001 yamaha blaster this week for 500 bucks. The Quad is all there not missing any parts and mostly stock. The quad was not running when we purchased it so I did a couple tests. There is good spark and I took the carb apart cleaned it very good and it seems...

Hey guys I have one more jet question. I am running a full fmf exhaust high flow air filter, removed air box lid and boyesen reeds I will also do the plus 4 timming mod. Where should I start with the main jet size also I need to know if I need a different needle. The yamaha tech said a 300 and a...

Hey guys I recently went for a nice ride this monday on labor day with some buddies. Well to make a long story short one of the buddies of mine was an inexpierence rider and hit a rock and clipped my back tire as I was passing him doing about 35-40.I went flying and rolled about 200 feet yet got...