yfz 450 shocks

[mud runner]

will yfz 450 front shocks fit with no mods on my blaster

 

[Braaaptor]

I think they will bolt up, but they are too long to be used on a stock front end without a shock relocation kit. If you run the shocks without a relocation kit, the front suspension geometry will be thrown off and handling will suffer.

 

[yzrider]

I think they will bolt up, but they are too long to be used on a stock front end without a shock relocation kit. If you run the shocks without a relocation kit, the front suspension geometry will be thrown off and handling will suffer.

as will your ball joint, don't do it, i relocated the lower mounts and didn't like it a whole lot, so i mounted them on the stock mounts, not a good angle on everything

 

[mud runner]

iv lowerd my frontend 1 1/2 inches

 

[speedemon17]

then your front end will be raised again if you go with yfz shocks i really DO NOT RECOMEND THEM super stiff

 

[mud runner]

well i need somthing else because stock sucks because when im raceing and go over a jump and get air they hit really hard

 

[speedemon17]

i thought u raced flat track why would u lower the quad if u do mx???

 

[speedemon17]

use banshee shocks

 

[mud runner]

i race flat track and tt the tt is pretty mutch the same as flat track but in the middle of the flat track track there is 2 jumps