Will my tires fit these rims ?

[darrencurry08]

was sketching up some templates there now and everything i done was accurate as can be, 4 inches from center to center on each stud, but only thing is how could i know the distance from the center of the circle to the edge ?:/

 

[Awk08]

was sketching up some templates there now and everything i done was accurate as can be, 4 inches from center to center on each stud, but only thing is how could i know the distance from the center of the circle to the edge ?:/

the one above that gets printed out from that website may be the exact inner or outer diameter and self align when placed inside the wheel ?

 

[Herpderplol]

Cross multiply and divide

 

[DUALSTROKE]

Maybe, but i doubt it. The chance of you drilling perfectly would be pretty small chance.

You would have to mark all the holes, and then center them, which would be pretty hard.

And with the design of those rims, would only make it harder.

It's not hard to print a template and drill the holes. The hubs have a center mark built in that won't let them go on if they are not correct. Almost all my wheels are drilled for 4/115 & 4/110. Pretty simple stuff

 

[darrencurry08]

yeah ill just get ink and print them out and do it right, they should be here on tuesday