Why Hullo There!

[SalmonHarpy]

Hey, I just joined and I now have a couple questions. Will 9" wheels fit on stock axles and what bolt pattern(s) do I need to look for?

Thanks

 

[YBMcCall1202]

As long as there the same bolt pattern then yes.

 

[02yamaturd]

4x110 in the back and 4x115 in the front

 

[scotj77]

welcome dude!!!!!!!!!!!!!!!!!!!!!!!11

 

[rtaylor15]

welcome man, your going to love this place!

 

[York Racing]

Welcome! And as for the question yes a 9" would fit and I believe the pattern part was answered correctly. You'll love it here. =]

 

[SalmonHarpy]

Cool, I'm sure I'll love it here. Thanks for the help

 

[super noober]

welcome aboard man, you're from atlanta i see, im a huge falcons fan I:I I:I

 

[little3mil]

welcome enjoy your stay

 

[blasterbogger]

Welcome man your gonna have a great time here....

 

[SalmonHarpy]

welcome aboard man, you're from atlanta i see, im a huge falcons fan I:I I:I

Awesome, the Falcons are doing great this year. I can't wait to see what they do in the Super Bowl?

 

[stabor1122]

4x110 in the back and 4x115 in the front

Actually the stock Blaster Rear pattern is 4-100 and front is 4-156. And welcome to the forum.

 

[SalmonHarpy]

Actually the stock Blaster Rear pattern is 4-100 and front is 4-156. And welcome to the forum.

Crap! So will rims off a warrior or a raptor fit the back?

 

[stabor1122]

Crap! So will rims off a warrior or a raptor fit the back?

Have to change hubs. YFZ, Banshee hubs will fit the Blaster axle and give you the 4-115 pattern that all the Yamaha sport quads use. You can get them fairly cheap on ebay.

 

[79 bronco]

Welcome.................

 

[SalmonHarpy]

Have to change hubs. YFZ, Banshee hubs will fit the Blaster axle and give you the 4-115 pattern that all the Yamaha sport quads use. You can get them fairly cheap on ebay.

I'm assuming that hubs are not that difficult to change, correct?

 

[SalmonHarpy]

Welcome.................

Thanks, I saw you on the Blue Traxx forum earlier today when I was looking around.

 

[02yamaturd]

I'm assuming that hubs are not that difficult to change, correct?

not at all...remove the cotter pin and take the nut off...when you get em off its good to put some never seize on the splines so they come off easier next time...

 

[SalmonHarpy]

Alright, well that's good to know. Thanks for the tips. Where do you get never sieze?

 

[York Racing]

Any local hardware store. Welcome if I didnt say that already. =]