Wheel stud spacers

[blasterdemon7]

Anybody using them?I see there cheap priced. I'm thinking there not to strong and would kinda make it look funny. Just want to get an opinion. Thanks.

 

[brandoz28]

they're stronger than the stud that they're being attached too, for most people they're just fine

 

[Whitty21]

if anything bends it will be the stud, not the spacer, i would go the aluminum block route though

 

[acezeesawtooth]

got em on mine no problems at all... i wouldnt go any farther than the +3's you begin to put to much stress on the stock studs and the axle if you do

 

[Whitty21]

got em on mine no problems at all... i wouldnt go any farther than the +3's you begin to put to much stress on the stock studs and the axle if you do

not to mention stearing issues

 

[acezeesawtooth]

oh i dont use them on the front... way to many problems if you put spacers on the front

 

[blasterdemon7]

oh i dont use them on the front... way to many problems if you put spacers on the front

Are talking about the stud spacers or any spacer on the front?

 

[Whitty21]

any spacer is gunna cause some extend of bump steer, the wider you go the worse it gets

 

[davesseasonal06]

what about if you use the aluminum block front spacers? would those cause any problems?

 

[speedemon17]

i have them on mine and there ok but i prefer staying in and not going out 6

 

[96MXBlaster]

i have them work great very strong