wheel spacers

[Auger50]

will wheel spacers hold up and not snap off..... where do i buy them and what kind I:I

 

[Awk08]

i've yet to see anyone on here break a set of wheel spacers.
i run the dura blue phenolic (hybrid plastic) style on front of my spare black blaster and haven't had any problems.

i've also seen the stud style run here in this rough terrain with no problems............

dura blue:
Wheel Spacer Blaster YFZ 200 Rear Easy Fit by Dura Blue New 4 100 QPS | eBay

aluminum:
http://www.ebay.com/itm/2x2-Inch-Fr...Parts_Accessories&hash=item43b3d6f0fc&vxp=mtr

stud style:
http://www.ebay.com/itm/3-WHEEL-SPA...Parts_Accessories&hash=item27cee2fe48&vxp=mtr


if ordering the disc style, pay attention to the bolt pattern listed in the ad, and if they're for front or rear.

 

[Wifesblaster]

We run the 5" spacers on all our bikes without problems. Havent jumped over 4' though.

 

[Blaaster]

Providing the studs are fitted to the wheel hub studs with the addition of Loctite and the lug nuts are tensioned to 33 ft lbs you should have no problems.







.

 

[blaster82]

I run the durablue phenolic ones on the back and havent had a problem yet. had them for like 6 years now.

 

[Quadrider10]

to prove a point:

huge step up on +4 studs.

 

[mud runner]

i run stud spacers (knock on wood) but i havent had any problems out of it

 

['05Blaster]

i have a pair of g force spacers for the front that will 1.5" per side ill sell for 50 shipped.
http://www.blasterforum.com/sale-18/yfz-450-heel-guards-t9-baja-rims-w-maxxis-razr-tires-53393/