WHAT do I do!? Tors Idle Screw is Missing

[Calebd22]

Just got a 2001 Blaster 200, 3 days ago. It needs a lot of work , there's no clutch , no muffler or brakes . It is also missing the idle screw that sits on top on the carb under the seat the screw that's on the tors to adjust idle is gone and I have no idea what to do from here . I've ran into nothing but problems with this blaster . It still runs and drives I just have to keep it idled buy hitting the gas. No idea what to do about this

 

[Awk08]

do a tors elimination kit, by vitos performance or motion pro, on ebay or their own websites

you'll need the idle screw kit with drill and tap to add the idle screw to the side of the carb,
and a tors delete cable w/ carb cap.
they can be found all together in a kit, or seperately

diy links:
http://www.blasterforum.com/threads/how-to-remove-your-tors-88-02-models.655/
http://www.blasterforum.com/threads/idle-kit-installation-instructions-blaster-banshee.52025/
http://www.blasterforum.com/threads/tors-eliminator-kit-install-vid.41019/

 

[Calebd22]

I'd rather not delete it and just get a new screw if that would be possible . But I guess the delete is my only option?? Thanks man

 

[Awk08]

I'd rather not delete it and just get a new screw if that would be possible . But I guess the delete is my only option?? Thanks man

chances are if it's missing, the threads down inside the tors box are stripped, it's common.
just delete it and not look back

 

[dirtysquared]

That tors brick will cause you more headaches than its worth. Awk's answer is the best solution to your problem.

 

[Calebd22]

Thank both of you guys for the info , I'll add the delete to my list of things to do !