Weird Bog

[Blasterr525]

It's been a long time since i have last been on here! BUt Anyways, on to my question.
Well it all started with me have a head gasket leak. So i was stupid enough to raise the size up of the jets to accomodate the extra air coming from the gasket leak. So i finally got around to replacing the gasket. And the quads fires up and idles fine. But when i WOT it, it just bogs real slow and woulnt rev completly up. So what is causing this "bog?" I havent touched the Needle on the side of the carb nor the A/F ratio screw. (I have a 28mm Kehin) But any help will do! thankss

 

[blasterBruce]

Sounds like you answered your Question with the Larger jet size for the Air leak , Do you have a Leak down tester ?

 

[Awk08]

could be.......airleak, reeds broken/cracked, carb needs cleaned, floats need adjusted, airscrew needs adjusted for highest idle, tors problem ect. ect.

click the bottom link below my sig pic, troubleshooting and all the links to those DIY's are in there

 

[Larry's Shee]

If it has been very long with gas in carb it needs to be cleaned. Also check for "mouse house" in exhaust.

 

[Blasterr525]

@blasterbruce i was 90% leaning on that, i just wanted to hear anohter persons word. @larryshee i had the carb apart during the gasket change.