I was wondering if water injection on a blaster engine would help increase power.
Whats your thoughts on tempurature reduction?
Whats your thoughts on tempurature reduction?
were thinking of mounting a small fan in front of my motor to help cool the motor
I was wondering if water injection on a blaster engine would help increase power.
Whats your thoughts on tempurature reduction?
Why not just take some soft copper pipe and run it thru the fins of the had with a circulator run to a small radiatior with a fan?Wrap it right around the ingine in between the cooling fins,Always ondered about that hehe.
I have a better idea!
Drill a hole into the head beside the spark plug hole and install a mechanical pump gear driven timed to the crank (where the oil injection pump goes would be a good spot) and install a wide spray pattern injector in the hole. The injector could be set to spray as soon as the exhaust port closes so it will cool the piston/cylinder walls but not dampen the fire out. This would have the maximum cooling capacity with the least amount of water/alcohol used and would affect the tuned pipe the least.
That would cool the charge and the running gear without affecting the tuned pipe as much