Do I cut any wires coming out of the cdi. To eliminate yor tors? Iv took the. Box on top of carb and done the throttle cable, spliced the wires under the hood and seat. The plug sparks like hell. But there doesn't seem to b getting. any fuel to the plug
tors removal
- Thread starter kenny Hill
- Start date
What year is it?
If you have had the carb off and have inverted it, floats have been known to stick in the up position cutting off fuel.
Crack open the float bowl drain screw and see if a constant dribble of fuel comes out of the drain hose.
If you have had the carb off and have inverted it, floats have been known to stick in the up position cutting off fuel.
Crack open the float bowl drain screw and see if a constant dribble of fuel comes out of the drain hose.
yes, the yellow with black stripe gets cut and connected to the solid black, right out of the CDI....
http://www.blasterforum.com/threads/03-06-tors-removal-diy.41973/
fix the leaking fuel bowl too..........
http://www.blasterforum.com/threads/carburetor-overflow-problem-vid.55600/
http://www.blasterforum.com/threads/float-heights-and-how-to-adjust-them.50565/
http://www.blasterforum.com/threads/easy-and-almost-free-way-to-stop-leaky-carbs.33335/
Similar threads
