First off, Ive been searching a ton, brand new to the Blaster, great info here. Got some questions as I need to place an order tonite to get my parts in early in the week with time to have the cylinder bored for riding on the weekend. (Ya ya, we'll see if it happens) This is a 98 Blaster.
Just bought this blaster for 650 bucks, great shape, bad top end. Compression tested at a whopping 45psi, yes guage is accurate, tested my other blaster and got 120 psi. Bike was not running when I got it. Pulled the jug here is what I got...
37F01 is stamped on inside of piston.
Question 1...
Piston measures 65.5mm. Jug measures 65.5 except for one spot on the bottom by the skirting which was 65.8. I measured all over, top to bottom of cylinder. Question is which piston do I buy? I like Wiseco, but open to suggestions. Is pro lite what I want or is there a better bang for the buck or just better quality? Im guessing I need standard 66mm piston, or just to be safe should I go to the 66.5mm piston?
Question 2...
Who do I order from? Rocky mountain atv seems to have alot of parts.
Question 3...
I assume I need a top end kit, Cometic? Tusk? OEM? or Dont buy whole kit just individual gaskets?
Question 4...
Need wristpin bearing, Wiseco?
Question 5...
What did I forget?
Thanks all.
Just bought this blaster for 650 bucks, great shape, bad top end. Compression tested at a whopping 45psi, yes guage is accurate, tested my other blaster and got 120 psi. Bike was not running when I got it. Pulled the jug here is what I got...
37F01 is stamped on inside of piston.
Question 1...
Piston measures 65.5mm. Jug measures 65.5 except for one spot on the bottom by the skirting which was 65.8. I measured all over, top to bottom of cylinder. Question is which piston do I buy? I like Wiseco, but open to suggestions. Is pro lite what I want or is there a better bang for the buck or just better quality? Im guessing I need standard 66mm piston, or just to be safe should I go to the 66.5mm piston?
Question 2...
Who do I order from? Rocky mountain atv seems to have alot of parts.
Question 3...
I assume I need a top end kit, Cometic? Tusk? OEM? or Dont buy whole kit just individual gaskets?
Question 4...
Need wristpin bearing, Wiseco?
Question 5...
What did I forget?
Thanks all.