The spindle has to be bent

[BustedassYZ]

I was doing wheelies on pavement, looped out, I get up and the bike is sitting on its side and I think it hit a tree before it rolled. Anyways when you look at the front end of the quad the wheels look like this []==\\

Not quite that bad but the left wheel is sitting crooked pretty bad. I already replaced the upper A arm with a used one from Ebay. still messed up. The wheel doesn't wobble at all so its not the rim. If the lower A arm was bent the wheel would be sticking out the other way right? I'm thinking the Spindle is bent. I just want a second opinion before I go and order more parts. Sooo What do you all think?

 

[stephen]

Yup i did the same. I bent the spindle, i also changed every thing that could bent and at last took both spindles of an check then in the were the same, the left one was bent open a bit, so i put then in a hydrolic vice and slowly bent it back until both were the same again.