STUCK IN REVERSE

[garyp53161]

Thanks for the feedback

Now I have another issue...

My intake hose was cracked and leaking oil, gas etc...due to the previous owner putting spacers on the carb so it pushed the intake hose back and piched it over time I guess.

I tried to strighten it out and also tried different combo on a stright pipe off the carb to a k&n etc..etc... all make it break up at high rpm...?

Crazy part is if I run no air filter and or intake pipe it runs like a bat out of hell, but even just added a stright pipe with no filter it boggs down again..?

Any ideas on this ??????

 

[Darrell]

is it robing the air with the pipe and filter on? i would try rejeting with what your doing, but the pipe and filter should work, you'll probally have to change your jets though! what jets are you running now?

 

[garyp53161]

the Kit the previous owner used was a MOOSE Jet Kit from what they gave me box wise.

Should i check the jet size they used ad the needle adjustment too..?

When we took the carb apart today it was real clean no debris

So you think because we have made it suck more air now it is bogging down due to it leaning out then..?

crazy on my end because with no hose and or filter it runs perfect...

or are 2 strokes different and it actually needs to have a smaller jet in it now..?