stop running

[blasterdude]

Put a reed spacer on today and started just fine and all the sudden it just dieed,plulled the plug and it was real wet so i put a diff plug and did the same thing.
pulled the carb and it is clean,i can smell fuel when i try to start the bike.
have spark
have fuel
new air filter
now i dont know what to do,Any ideas?

 

[darealblaster]

Re-jet.........

 

[blasterdude]

I have a 250 jet in it know.To big or small?

 

[blasterdude]

one up from stock-I think

 

[darealblaster]

depends what mods you have. I would go down 1 size on the jet and do a plug-chop. If not mess with the needle. the farther the clip is from the pointed end the leaner it will be, the closer it is to the pointed end the richer it is.

 

[blasterdude]

I cant get it started
I have a toomy slip on a reed spacer,oil block off

 

[blasterdude14]

the float may be sticking and causing it to pour out gas which would flood it which could cause your no start problem not sure though

 

[L.T.]

have you tride to run start it?

 

[blasterdude]

Do you mean pop start?
If so i have not tried it
I had the shop test my carb and it is good but my float needs adjusting but it was fine before...

 

[blasterdude]

And off the subject how do i get rep points

 

[yb200]

did you break a reed pedal????

 

[blasterdude]

reeds are good I tried another set and still nothing

 

[blasterdude]

I still cant get this piece to start....
Need more help...

 

[L.T.]

Do you mean pop start?
If so i have not tried it
I had the shop test my carb and it is good but my float needs adjusting but it was fine before...

jip I do mean "pop" start it get some one to pull you. Just a quick question did you check! for spark?

 

[blasterdude]

It has good spark

 

[L.T.]

It has good spark

what is your compression sitting @

 

[blasterdude]

I am going to do that in a littel bit and i will let u know

 

[blasterdude]

Just checked the comp 130-135 psi is that good or bad??

 

[blasterdude]

Still getting a real wet plug ?
What is going on?
And what is pop starting going to do?

 

[yb200]

take the reed spacer off and try the stock 230 jet ...with your mods i dont think you need a 250 main