How hard is it to replace pistons?
Would I be able to do it myself with instructional guides or is it a biotch?
Would I be able to do it myself with instructional guides or is it a biotch?
Putting in a piston
- Thread starter Dallas
- Start date
There are diy for this all over the internet... With a bit mechanical ability, and some proper tools (torque wrench, motion pro adapter for the jug nuts) you should be able to do it.
Even if you come back here for step by step instruction you should be able to do it in a few hours max.
Even if you come back here for step by step instruction you should be able to do it in a few hours max.
Super easy. take off the head, take off the piston, put the new piston and gaskets on, put the head back on and torque it to spec.
easy.. if your new to it.. take it to your local shop or what ever.. atv place.. ask them if you need to bore it out.
i just rebuilt mine, took me 2 hours not hard
there tryin to rip you.its super easy.i never took a 2 stroke engine apart and i did mine by myself in like an hour or so
