Need some advice

[Blastin]

I am getting a 2000 blaster and any suggestions of what to do to the engion first?

 

[manson6]

Just make sure the motor is in sound condition and shape. And especially make sure its running top notch before you hammer on it just in case there are hidden issues. just bought a blaster about 5 months ago and the motor let go on me, Probably because my daughter redlined the crap out of it but you wanna be safe then sorry. Also make sure there is oil in the tranny.

 

[blasterdemon7]

Plug chop to check jetting and a leak down test. Make sure air filter is clean and change trans fluid.

 

[joshuafrazier]

do a compression check before the leak-down.

 

[jlsparky7]

Check out the links in my signature. Few vids in there. All the suggestions above are great.

 

[Racer51]

Just make sure the motor is in sound condition and shape. And especially make sure its running top notch before you hammer on it just in case there are hidden issues. just bought a blaster about 5 months ago and the motor let go on me, Probably because my daughter redlined the crap out of it but you wanna be safe then sorry. Also make sure there is oil in the tranny.

the other way arround within reason will do that