Need help / advice

[Zbskater400]

I did have a similar post about this but I wanted to update... this bog/ sputter I'd really bothering and def would like friendly advice. My bike is leak free 100% holds 7 psi and does no drop at all. I did the test twice. Compession Is 120-125 psi, I replaced both crank seals still nothing. Set floats and have jetting close. Reeds are a couple weeks old and a fairly new and checkout ok.. I'm aiming towards stator or coil ????? What do you guys think.

 

[Blaaster]

To rule out a fuel problem, when it bogs/sputters reach down and pull the choke on a little, if it gets better you are too lean, if it gets worse too rich.

 

[dirtysquared]

The bog/sputter is at 3/4 to WOT if I remember right?

Try ohming out the stator and coil.

Can you hear this bog, or feel it? Possibly clutches slipping??

 

[Zbskater400]

The bog/sputter is at 3/4 to WOT if I remember right?

Try ohming out the stator and coil.

Can you hear this bog, or feel it? Possibly clutches slipping??

Correct, I have a new clutch. I'll prob just bring my bike to ken. I've done everything still nothing. He will get me rolling.

 

[Awk08]

unscrew plug boot off of coil wire, (lefty loosey)
cut 3/8-1/2" off plug wire and screw boot back on
better yet, go to auto or cycle parts store and get a new screw on, non resistor, NGK plug boot, they're like $5-10 (still cut wire end off with new boot)

http://www.ebay.com/itm/NEW-NGK-LZF...ash=item2a4c382a32:g:5~EAAOSwEeFU369C&vxp=mtr

 

[Zbskater400]

unscrew plug boot off of coil wire, (lefty loosey)
cut 3/8-1/2" off plug wire and screw boot back on
better yet, go to auto or cycle parts store and get a new screw on, non resistor, NGK plug boot, they're like $5-10 (still cut wire end off with new boot)

http://www.ebay.com/itm/NEW-NGK-LZF...ash=item2a4c382a32:g:5~EAAOSwEeFU369C&vxp=mtr

Awk..... you are a life saver that was the problem the whole time ! Just got a new one on and bam!