Took my blaster out today and it was misfiring bad and then would bog out till it stalled I'm almost certain it has nothing to do with a fuel issue, any advice will help thanks in advance guys
Misfire troubleshooting help
- Thread starter 508blaster
- Start date
Sounds like a sheared off flywheel key . Remove stator cover to check . Will also need a flywheel puller . Check for a good spark and compression too
Ok when I remove the cover what will be a way to tell if it's sheared off by looking
not unless you can physically
move the flywheel without the crank spinning
or wobble it as in it is loose.
the woodruff key align's the flywheel magnets with the stator.
10 buck for a flywheel puller
3 bucks for the woodruff key
and you will need to hold the flywheel from spinning
somehow some way..either the proper tool/ impact /homemade ect
