Eyup pal yeh the alyminium one and there is no leaks I thought maybe the stator is not in the right position could this be the causeAre you talking about the case for the bottom end? Better leaktest!!
The earth you mean pal and were is it located I have a cut out switch and have found that earth but were is the one fir the spark thanksHave you checked your grounds good?
I had the full side of the engine case the gearshaft side changed cause the chain come off and snapped the aluminium case and yeh the fly wheel has bin took of and the stator plate and could the timeing be outThe coil...... Also did you remove or mess with the fly wheel at all? Is the flywheel nice and tight? What is the reason you replaced this gasket for?
I dont c how even if the case had the slightest leak it would let it start up 3 times and be running fine then come to start up again and have no spark and I will have it leak tested tomorrow one hundred percent just to make sure it isnt leaking after I have solved the problem of having a spark ten 20 minz later wen I got bacj from buying new plug because I thought this could be the problem then found out no spark I rekon if I could get it sparking again it would run mintSorry to be a parrot, but what were the results of the leak test you did after re build.
I presume you did one!