I was just going to cut a wrench in half that fits on the bolt then weld a socket onto it and put the torque at 18 instead of 20 pounds because it would have more leverage.
Is my bottom end left seal bad?
- Thread starter redwhiteblaster
- Start date
I was just going to cut a wrench in half that fits on the bolt then weld a socket onto it and put the torque at 18 instead of 20 pounds because it would have more leverage. Also where do you buy a crows feet and how much is it.
Sears or good auto parts. There is a formula for knowing exactly what the new torque value would be.
If some one doesn't chime in with it, try Google
If some one doesn't chime in with it, try Google
http://www.engineersedge.com/manufacturing_spec/torque_wrench_1.htm
If you make your own crow foot, make dimension "E" an even number for sake of "easy" math
If you make your own crow foot, make dimension "E" an even number for sake of "easy" math
Lower the setting to under 18 ft lbs, that what jug bolts are tensioned up to.
If you have seen kens videos, he made himself a crows foot just for the blaster. i believe he tensioned it to 15-16 after some math
Similar threads
