I can remove the carb but there's a wire on the right side that connects to te crank case. I don't know how to get it off. Not the one that connects to the gas tank. Can someone help me out
There is a wire connected to the harness that goes to the "TORS" box and a hose that runs down into the plastic cover on the very front of the cluth cover. The hose is the oil injection tube and it can be a real pain to pull off.
It is a hose I believe. I'll try and get off.. Thanks. So it's okay to give it a little pull.
It came off nice and easy. I was just worried about pulling stuff off not knowin if it would break
Thanks