Help me identify these wires!

[Tocco]

Ok, so one of these wires comes off my tors system on top of my carb, and the other one by the carb comes up somewhere from the bars. The connections down by the carb dont fit eachother, they are different. The one up by the bars doesnt fit it either. I had a twist throttle kit on it before, and i put this thumb throttle back, it came with a new tors system to, and it was off a 1996 blaster (mines a 1996). And my quad gets no spark. Could this have something to do with it? Or can i just leave them unplugged and call it good? Or should i get a tors delete kit? Thanks in advanced guys!

http://www.flickr.com/photos/119328233@N04/12918246475/

http://www.flickr.com/photos/119328233@N04/12918349993/

 

[Awk08]

for pre 03 blasters, unplug the tors box under the hood, it's a black box right near the cdi, tors has 3 wires to it.
just unplug it and forget the rest

 

[Tocco]

for pre 03 blasters, unplug the tors box under the hood, it's a black box right near the cdi, tors has 3 wires to it.
just unplug it and forget the rest

Thanks awk! Im going to pick up a moose carb cap with the steel braided line, and ditch the TORS system, causing way to many problems

 

[ilm121209]

yay for tors delete. nothing but problems