hello world

reagor

New Member
May 23, 2012
266
14
0
nj
www.google.com
new here just wanted to say hi

just scooped a 99 blaster for $700
new clutch
fmf full exhaust & silencer
idk what was done to carb

20in holeshots in the rear with hairs on the tread
no bent rims/axles

nerf bars with webbing
aftermarket grab bar and front bumper

sh*tty cable op drum brakes
(ive had the rear apart 3 times already)

mods on the way (waiting on parts)
rear hubs to fit honda bolt patern (i ride w/ a 300 ex and a 400ex)
lug spacers (just to test $20)
gsxr1000 rear hydrobrake assm to fab in place
12T front sprocket (to compensate for the 22in tires im putting on)

mods in the near future
400ex rear shock
upgrade front shocks
widen frontend (diamondj) for yfz450/400ex


i ride in some wet nasty tight trails and this thing is an animal, but need some more ground clearance

i cant get the damn thing outa 3rd back there...mostly 2nd riding around
 
welcome to BF
thread moved to "introduction" section

sounds like a good start, better check that main jet to insure it is jetted for that pipe...270-290

and i would refrain from buying a diamond-j kit for any other quad than a blaster, the bolt patterns will be different
 
welcome to BF
thread moved to "introduction" section

sounds like a good start, better check that main jet to insure it is jetted for that pipe...270-290

and i would refrain from buying a diamond-j kit for any other quad than a blaster, the bolt patterns will be different

i meant a diamond-j kit for blaster with shock upgrade to the better shox
 
here are some pics 1.5" lug extenders and flipped front axles

also here is a video of the mud...and this is a dry day

http://youtu.be/T543omVDn1I
 

Attachments

  • IMG_20120524_200435.jpg
    IMG_20120524_200435.jpg
    92.3 KB · Views: 112
  • IMG_20120524_200448.jpg
    IMG_20120524_200448.jpg
    93 KB · Views: 105
Last edited: