ground up build. need help and advise !

[bansheedave]

I'd like more pics of the predator rear end on there.

 

[chevys9]

 

[chevys9]

its a real tight fit but lines up good dont really know if its any wider or longer but i think so. only thing i had to do was drill out the swing ate pushing they were a little to small for the stock swing arm bolt

 

[chevys9]

could someone help me out i have no clue how to take this bearing off my ceank any help would be mazing. thanks in advance

 

[chevys9]

 

[Awk08]

bearing seperator/puller.........
http://www.harborfreight.com/bearing-separator-and-puller-set-93980.html

 

[Zach214]

I did a complete rebuild on my blaster and here's a tip look close at everything before you ride it! I made that mistake and forgot to hookup the oil tube. I got exited and rode it all weekend and at the end of the day I blew it up. DON'T make that mistake!!!!!!!!

 

[Rj in the dunes]

that is great thanks a lot for the help ive also started stripping the frame and have it amost all the base metal. i really like the bare metal look would there be any way tp keep it like that and not rust out? i know there is clear coat but will that protect it enough?

If you clear coat like 6-7 times it should be great