Hi new to the forum. i just got a blaster up and running with a vitos BBK kit and a kehin 35mm carb. pro circuit pipe vitos reeds custom aluminum intake box with filter and pre filter
55 pilot and a 168main float height is correct and im sitting at 1 3/4 turns out. needle clip is at the very top position the issue im having is the bike doesnt move fast down low and once it revs out it will pull hard all day long. if im cruising in first or second and punch it, the bike wont lets say pop a wheelie until the very end of the power band and needing to shift up. i can baby the throttle in any gear and the bike will cruise no problem. but just no pep down low at all.
is my Pilot to rich causing me to lean up the mid? i started the needle clip at 1 down from the middle and made no difference so i starting going positions up on the needle and it got better but still not where i believe it should be.
55 pilot and a 168main float height is correct and im sitting at 1 3/4 turns out. needle clip is at the very top position the issue im having is the bike doesnt move fast down low and once it revs out it will pull hard all day long. if im cruising in first or second and punch it, the bike wont lets say pop a wheelie until the very end of the power band and needing to shift up. i can baby the throttle in any gear and the bike will cruise no problem. but just no pep down low at all.
is my Pilot to rich causing me to lean up the mid? i started the needle clip at 1 down from the middle and made no difference so i starting going positions up on the needle and it got better but still not where i believe it should be.
Last edited: