gears wont engage fully ? hepl please

[dustin lafeir]

i had problems with it lunging foward and dying before , now i have replace the clutch plates, spring and bolts , adjusted the actuater correctly now the gears wont full engage, almost like if the clutch lever was being pulled .. if i jack the quad up and start it and put it in gear it will move the tires for 300 seconds or so then stop.. ????

 

[Herpderplol]

You need to go back in and adjust the little nut in the middle of the clutch plates

 

[MrTwoJay]

Jip, adjustment! Follow manual or look for a thread, there are many.

 

[98blaster]

When you put clutch together did you make sure the dot on the pressure plate was lined up with the dot on the clutch boss? If not the pressure plate will sit up off the clutch plates some

 

[dustin lafeir]

i took the cover off and the pressure plate was on wrong , then i relized a random broken o ring under were the shifter gears / arm was .. ?? where does it come from and do i need it ?

 

[bansheedave]

i took the cover off and the pressure plate was on wrong , then i relized a random broken o ring under were the shifter gears / arm was .. ?? where does it come from and do i need it ?

does your oil fill plug have its o ring on it? if not, thats where your mystery o ring came from