full fmf gold serirs wont mount

[qaudracer711]

i was gonna get a full fmf gold series exhaust and somebody told me i need to buy a exhaust adapeter or something is this it cbeck the link out at the bottom


YAMAHA BLASTER YFS200 EXHAUST MOUNT BRACKET SHIPS FREE | eBay

 

[qaudracer711]

yamaha blaster fmf gold series fatty exhaust | eBay this is the pipe do i need the hanger thing?

 

[mmajay]

I see no reason for that hanger.

 

[qaudracer711]

so do i need anything to mount it cuse the mount on the exhaust looks really far back compared to stock so how would i mount

 

[DUALSTROKE]

That hanger is the stock hanger which you will need.However they are stock on all blasters so most likely you already have one.Take a look under the front hood right next to the stem.You will see where that mounts to and most likely you will see that same mount already bolted up.If you have this mount you are good to go with just what is in the ebay add.If this mount is not there then I would deffinatley get one.All inframe aftermarket pipes utilize this factory mount.Main thing is to make sure whatever pipe you buy that it comes with a flange.

 

[qaudracer711]

damn im so glad i found this site thanks guys so much lol

 

[qaudracer711]

u said look where it mount to motor or where silencer mount to that big jug thing?

 

[qaudracer711]

and the mount on the silencer it seems far back it should mount tho right and yes that mount is on my blastey

 

[mmajay]

I had that same exhaust on my blaster and it will be fine and mount up fine.

 

[qaudracer711]

thanks alot guys

 

[mac2mac]

When you get that pipe make sure you have a good seal around that exhaust flange... Alot of them come very loose like mine was... http://www.blasterforum.com/engine-13/fmf-sst-exhaust-37195/index15.html go down three post and look at the video

 

[blasterboy18]

ya mac is right! mine came lose after about 3 days of having it on! when i first got mine on it was a tight tight fit but youll love it! the sound is

 

[Larry's Shee]

Don't forget to re-jet for the new pipe !!