tbrooks Active Member Sep 24, 2013 1,367 233 114 NC mtns Apr 5, 2014 #1 I just wanted to check before I put em in. It doesn't look like the spindle tapers where the bearings sit, I didn't see anything in the manual, but its not very detailed
I just wanted to check before I put em in. It doesn't look like the spindle tapers where the bearings sit, I didn't see anything in the manual, but its not very detailed
DUALSTROKE Giving away free clues Technician Mar 2, 2008 5,263 426 134 masshole Apr 5, 2014 #2 The bearings do not have a taper. There is a spacer that is tapered between the two bearings.
Blaaster Moderator Staff member Technician Jul 18, 2011 15,384 1,120 165 eastern australia Apr 5, 2014 #3 The bearings are pinched between 2 collars by a nut pre loaded to 51ft
L Larry's Shee Active Member Technician May 23, 2009 9,271 1,057 149 Ortskaville, MI Apr 7, 2014 #4 Make sure they are well greased. Install with markings facing out. Pack seals with grease also.