DIY VID How to change the jets in your carb

[Blasterdude27]

I'm not the best at making vids but I hope this can help someone out. It was also 17 degrees so I was shaking a bit hahaha.

 

[darealblaster]

hey bro can you do one on the needle change on a blasters, they are a biotch to change lol

 

[Blasterdude27]

hey bro can you do one on the needle change on a blasters, they are a biotch to change lol

If the f*cking screws wernt stripped! X(

I'll see what I can do..

 

[blasterfreek30]

nice job man...........i lmao at 1:49.....trying to get the screw diver in the head of the hole lol

 

[darealblaster]

If the f*cking screws wernt stripped! X(

I'll see what I can do..

Aight bro thanks, that needle is a biotch to acces and put back, its frustrating lol, i need to finish jetting my blaster and i need to get to the needle again, X(
And i dont wanna go back there lol, but nice video BTW

 

[Ready2rev]

nice vid man! rep for you.

 

[stephen12091985]

If the f*cking screws wernt stripped! X(

I'll see what I can do..

hey i didnt see ur copper washer in there when you took the main jet out.you might want to check that

 

[GTX21]

hey i didnt see ur copper washer in there when you took the main jet out.you might want to check that

I thought the washer was brass?:-/ Mine was

 

[jbblaster]

nice vid blasterdude!! rep given. also only 17 deg. thats not cold. j/k thats cold as balls!! btw you should get some hex screws for the bowl.

I thought the washer was brass?:-/ Mine was

i think the washer is brass.