DIY crows foot tool - help

[Davo]

I have been looking "Blaasters" thread on making a jug torque wrench adapter for jugs bolts. I need to see the distance used for the socket placement to be welded. Thanks

 

[jus_me]

Are you concerned with its location because of what torque should be applied ? If so than it really doesn't matter where you weld the socket as long as you can get it on all the bolts. there is an equation for no mater where the adaptor is.

Same as this but your measurements may change depending on where your adaptor is , but the math is all the same.

http://www.motionpro.com/motorcycle...or_motion_pro_torque_wrench_adapter__08-0134/

 

[Blaaster]

http://www.blasterforum.com/threads/crows-foot-tension-conversion.58800/

 

[Larry's Shee]

When I made one I used an even amount, 4", easy math.

 

[Davo]

Cool, thanks guys!