I've seen that the clutch side bearing is a slip fit onto the shaft, but does anyone know of a video that shows this? Reason is I am able to slide the bearing onto and back off of the shaft by hand, and I was told that this means the crank is no good, but if it's a slip fit, then it seems like this would be totally possible. I'm not talking so loose that it'll slide off if I flip the crank or anything like that, but I don't have to really push to get it to bottom out, and a little turn while lifting will slide it back off.
I don't want to install it if it's no good, but also don't want to buy a new crank for no reason either.
I don't want to install it if it's no good, but also don't want to buy a new crank for no reason either.