Clutches won't pull!

[InfamousBlaster]

So I decided to change my own clutches on my blaster and I'm pretty sure I assembled them correctly but for some reason when I ride the gears barely pull for about 5mins of riding and still after that I can feel them slipping a little.. Can anyone tell me why this is or what I did wrong??

 

[Awk08]

prolly needs internal rod adjustment, can be seen in these vids............
http://www.blasterforum.com/threads/blaster-clutch-assembly-vid.42995/

http://www.blasterforum.com/threads/kor-engine-assembly-vids-no-crank-puller-needed.51169/

did you soak the new fiber plates in oil overnight before installing ?

get the 2 dots aligned on the pressure plate and clutch basket ?

 

[Blaaster]

What oil did you use?

 

[DeJay1206]

I'm gonna say that you probably need to adjust the actuator. There is plenty of info on here about how to do it. Either that or you have the wrong oil in. I know from experience that using oil with friction modifiers in it can cause the clutch to slip. When I first rebuilt my motor I used the wrong oil and it would barely catch gears. Swapped some new oil (ATF Type F) and it's fine again.

Check the actuator. The actuator should come to a point on top and it should be lined up with a line on the top of the case.

Here's a pic of what I'm talking about.