i have had problems with my clutch adjuster for a good amount of time now and am sick of it. i'll be riding around for like ten minutes, and my pushrod nut will spin almost all the way off. then, i'll put it back together and it will run for another then minutes and do the same thing. i pics of the stuff that i have. i think there is supposed to be a nylon locknut or somethingto keep it from spinning off, and so does my cousin who looked at it to see why it would do that.
this is what i got from bike bandit, but there is nothing behind the pressure plate to hold it in.
this is the nut that i had bfore. the big washer segment would go behind the plate and screw onto the pushrod.
i'm not positive, but i think i should put the big washer type nut whre i used to put it, but then put the other regular nut in front with the mini washer, like below:
this is what i got from bike bandit, but there is nothing behind the pressure plate to hold it in.
this is the nut that i had bfore. the big washer segment would go behind the plate and screw onto the pushrod.
i'm not positive, but i think i should put the big washer type nut whre i used to put it, but then put the other regular nut in front with the mini washer, like below:
