carb tuning help

[blastermaster94]

ok my blaster wont idle and barely runs now after cleaning the carb. before it ran great i didnt even need the choke to start or anything. need help please!!

 

[ken84]

hmm mine was doing that. then 2 days later its not getting no spark. maybe you have a weak spark?

 

[Surfrjag]

clean air filter and new plug? try the basics first. maybe you have dirty fuel? is it a stock carb with the tors on it?

 

[Awk08]

you sure you put it all back together properly.........

float adjustment correct ???
plastic washers on both sides of the needle clip ???
brass washer under the main jet ????
and airscrew at 1 1/2 turns out to start ????

 

[blastermaster94]

spark is good fuel is good spark plug is good air filter is good. im pretty sure i put everything back together i messed with it today and i got it to start without the choke but it still barely runs

 

[jlsparky7]

Sounds liek you need a TORS eliminator kit... If you havent bought one yet its well worth it. How tos in the link in my signature.

 

[Larry's Shee]

Go back thru carb, you missed something. Check float height, is wire for seat needle hooked to float tang? Washer and main jet slosh baffle under main jet?