Carb help.

[Sabin1269]

I don't need any mechanical advice my Blaster is running great but I want to upgrade my carb, it's pretty much the only thing left stock on it and was looking for some advice/reviews on some of the aftermarket carbs that some of you guys/girls may have on yours. Any Ideas for what I should do?

 

[99LRDblaster]

I don't need any mechanical advice my Blaster is running great but I want to upgrade my carb, it's pretty much the only thing left stock on it and was looking for some advice/reviews on some of the aftermarket carbs that some of you guys/girls may have on yours. Any Ideas for what I should do?

So you mean to say you have a 285 Trinity kit, with a +4 mil stroker, milled and rechambered head running 220psi, full drag exhaust, and run 120 octane gas?

It helps to know your mod list on the engine/intake/exhaust. For ported stock cylinders the general consensus is 30-33mm carbs....for big bore and ported engines, then 34-38mm.....generally just a 35mm.

 

[Blasterr525]

or if you just have a .40 over you can run a 28mm carb