blaster wont kick start?

[Amii A]

Hi there im new on the Forum and this forum has helped me alot so far as assembly wise

Im sitting with the problem that my blaster wont kick start but will start once pushed or towed what does this mean??
It rides perfect once it starts but once it stands for about 20mins it doesn't start?

 

[Awk08]

have you tried a new NGK b8es sparkplug ?
check reed petals for cracks/chips
cleaned carb and air filter lately ?
do a compression test, anything around or below 100 psi. will show signs of hard starting.
report back with your findings and we'll go from there

 

[Amii A]

have you tried a new NGK b8es sparkplug ?
check reed petals for cracks/chips
cleaned carb and air filter lately ?
do a compression test, anything around or below 100 psi. will show signs of hard starting.
report back with your findings and we'll go from there

Yes new plug in, cleaned carb, air filter and compression is perfect? But just wont kick will start and ride perfect after its towed on the start

 

[Amii A]

Yess put new plug in, checked reeds, clean carb and air filter, it runs perfect once towed to start kill switch everything works it just wont kick start if i switch the bike off and leave it for a while but as soon as its towed the bike starts no problem so could it be the stator?

 

[Awk08]

sounds like a low compression problem to me, time to do a compression test and report back

pilot jet cleaned ?
what size is it ?
airscrew setting ?
float level ?

compression is perfect?

what were the results in psi. of compression test ?