Blaster Rebuild

[Blaster528]

Look good but get some better heal guards or them wheels will eat your feet.

That's what's these are for. But I can't figure out how they go on. Anyone else have a set of these???

 

[Markblaster]

mmmm What are they off? Not off a blaster.

at the front use U bolts to clamp around frame rails and a plate on it. Not sure if you able to weld or not.

if you cannot weld then use 2 U bolts and a plate on top.

 

[Blaster528]

mmmm What are they off? Not off a blaster.

at the front use U bolts to clamp around frame rails and a plate on it. Not sure if you able to weld or not.
View attachment 29992

if you cannot weld then use 2 U bolts and a plate on top.
View attachment 29993

Supposedly they are off a blaster. I don't have a welder but I might have access to one

 

[Markblaster]

for the rear mount if you can weld. best option would be to shorten the nerf bar to make the mount go up to the foot peg.

If you cannot weld. Use long ass bolts and a spacer.

 

[Markblaster]

View attachment 29995
Supposedly they are off a blaster. I don't have a welder but I might have access to one

What happens if you mount the nerf bar to the foot peg 1st. where is the front of the nerf bar end up?

 

[Markblaster]

Think that the front center part goes right up to the lower a arm mount. like this.

 

[Blaster528]

What happens if you mount the nerf bar to the foot peg 1st. where is the front of the nerf bar end up?

Um in the front tire If I known these weren't for a blaster I wouldn't have bought them. I was thinking maybe I can weld another peg onto my current one?

 

[Markblaster]

Yes you can bolt another foot get to the one you have. seen a couple of people do it on here for bigger foot pegs.

http://www.blasterforum.com/threads/custom-foot-pegs-stainless-steel-and-lowered.61714/

 

[Blaster528]

Think that the front center part goes right up to the lower a arm mount. like this.
View attachment 29997

Yeah I could try. Man dude you got some great copy and paste skills. I was looking at other nerfs and noticed that only raptors have the center part like mine. Maybe these are raptor. Refs not blaster

 

[Markblaster]

yeah just had a look on google images and looks like raptors use that front middle mount parts.

Blaster nerfs normally have a mount to the front engine mount or to the frame like mine.

Here you can see the nerfs that have the mount bracket off the engine mount. I had Alba racing nerfs on my bike when I got it and they mounted to the front of the foot peg.

Now running XFR ones with heal guards built in.