Hey guys i'm new to this forum and need some help with my Blaster. It is mostly stock, when i bought it the carb was very gummed up so I replaced it with a niche industries one off of amazon. It has Boyesen power reeds in it and the guy before me drilled six holes in the air box lid. I just put a full Bills exhaust system on it and i cant figure out the jetting. I had the stock pilot jet in it to start off with and then i tried a 35 and it seemed to run fine but was fouling plugs (too rich i guess), now i have all the stock jets in it and it is driving fine but the idle hangs like crazy and it is fouling a plug almost every ride, any ideas? Thanks!